Say Goodbye To Chilly Mornings: How To Effortlessly Start Your 2017 Nissan Altima Remotely

Starting your 2017 Nissan Altima with a remote keyless entry (RKE) system is a convenient and hassle-free way to access and operate your vehicle. This advanced feature allows you to unlock the doors, activate the ignition, and start the engine remotely, providing enhanced security and convenience. In this comprehensive guide, we will explore the steps involved in starting your 2017 Nissan Altima with a remote, ensuring a seamless and effortless experience.

Understanding the Remote Keyless Entry (RKE) System:

The RKE system in your 2017 Nissan Altima consists of two main components: a key fob transmitter and a receiver unit located within the vehicle. The key fob transmitter houses a small battery-powered circuit board that communicates with the receiver unit using radio frequency (RF) signals. When you press the buttons on the key fob, these signals are sent to the receiver unit, which then interprets the commands and activates the corresponding functions in your vehicle.

Preparing the Remote Key Fob:

Before you can start your 2017 Nissan Altima with the remote, you need to ensure that the key fob is properly prepared and functioning. Here are a few steps to follow:

1. Check the Battery: Make sure that the battery in your key fob is fresh and has sufficient power. A weak or dead battery may prevent the key fob from sending signals to the receiver unit.

2. Clean the Key Fob: Keep the key fob clean and free from dirt, dust, or debris. Any obstructions or contamination can interfere with the signal transmission between the key fob and the receiver unit.

3. Test the Key Fob: To verify that the key fob is functioning correctly, press the lock and unlock buttons several times. If the vehicle’s lights blink or the horn honks in response, it indicates that the key fob is working properly.

Steps to Start Your 2017 Nissan Altima with Remote:

1. Unlock the Doors: Approach your vehicle and press the unlock button on the key fob. This will send a signal to the receiver unit, unlocking the doors and allowing you to enter the vehicle.

2. Enter the Vehicle: Once the doors are unlocked, open the driver’s door and get inside the vehicle. Close the door firmly to ensure that the vehicle is secure.

3. Press the Brake Pedal: Depress the brake pedal firmly with your foot. This step is crucial because it activates the brake light switch, which sends a signal to the vehicle’s computer indicating that the brake is engaged.

4. Press the Start/Stop Button: Locate the start/stop button, which is typically situated on the dashboard or center console. Press and hold the start/stop button for a few seconds until the engine starts. You may hear a clicking sound or see lights illuminating on the instrument cluster during this process.

5. Release the Brake Pedal: Once the engine has started, release the brake pedal. Your 2017 Nissan Altima is now ready to drive.

Additional Tips for Starting Your 2017 Nissan Altima with Remote:

• Ensure that you are within a reasonable distance from your vehicle when using the remote keyless entry system. The range of the RF signals may vary depending on factors such as environmental conditions and obstructions.

• If you are having difficulty starting your vehicle with the remote, try moving closer to the vehicle or repositioning the key fob. You can also try using the spare key fob to eliminate the possibility of a faulty key fob.

• If the remote keyless entry system is not functioning properly, consult your vehicle’s owner’s manual or visit an authorized Nissan dealership for assistance.

Troubleshooting Common Issues:

1. Remote Key Fob Not Working: If the remote key fob is not unlocking the doors or starting the engine, check the battery, clean the key fob, and test it by pressing the buttons multiple times. If the issue persists, you may need to replace the key fob battery or have the key fob diagnosed by a qualified technician.

2. Engine Not Starting with Remote: Ensure that you are pressing the brake pedal firmly when starting the engine with the remote. If the brake pedal is not depressed, the vehicle’s computer will prevent the engine from starting. Additionally, check the vehicle’s battery and charging system to ensure that they are functioning properly.

Summary:

Starting your 2017 Nissan Altima with a remote keyless entry system is a convenient and secure way to access and operate your vehicle. By following the steps outlined in this guide, you can effortlessly unlock the doors, activate the ignition, and start the engine remotely, enhancing your driving experience. Remember to maintain the key fob properly, troubleshoot any issues promptly, and consult your vehicle’s owner’s manual or an authorized Nissan dealership for assistance if necessary.

Quick Answers to Your FAQs

1. Can I start my 2017 Nissan Altima with the remote if the battery is dead?

No, the remote keyless entry system requires a functioning battery in the key fob to transmit signals to the receiver unit. If the battery is dead, you will need to use the traditional key to unlock the doors and start the engine.

2. What should I do if the remote key fob is lost or stolen?

If your remote key fob is lost or stolen, you should immediately contact your Nissan dealership. They can provide you with a replacement key fob and reprogram it to work with your vehicle.

3. Can I use the remote keyless entry system to start my 2017 Nissan Altima from a distance?

The range of the remote keyless entry system may vary depending on factors such as environmental conditions and obstructions. Typically, you should be within a reasonable distance from your vehicle, usually within a few feet, to successfully start the engine using the remote.