Unlock the Secret: How to Effortlessly Start Subaru Legacy with Key Fob!

The Subaru Legacy is renowned for its reliability, safety, and performance. But did you know your key fob can unlock a world of convenience, including starting your engine without even needing to insert a key? This guide will walk you through the process of how to start your Subaru Legacy with your key fob, making your daily commutes and adventures smoother than ever.

Understanding Your Key Fob

Before diving into the specifics, it’s crucial to understand the key fob itself. Your Subaru Legacy key fob is more than just a simple remote to unlock your doors. It houses a sophisticated system that allows for keyless entry, remote start, and even panic alarm activation.

Keyless Entry: The First Step

The first step in starting your Subaru Legacy with your key fob is to unlock the car. Modern Subaru Legacies come equipped with keyless entry, allowing you to unlock your car without physically inserting a key. Here’s how it works:

1. Locate the Key Fob: Make sure your key fob is within range of your vehicle, approximately 3-5 feet.
2. Press the Unlock Button: Your key fob will have a button with a small unlock icon. Press this button once to unlock the driver’s door.
3. Unlocking All Doors: To unlock all doors, press the unlock button twice.

The Power of Push-Button Start

Now that your car is unlocked, let’s get to the heart of the matter – starting your Subaru Legacy with the key fob. Here’s a step-by-step guide:

1. Locate the Push-Button Start: Your Subaru Legacy will have a push-button start ignition located on the dashboard, usually near the steering wheel.
2. Place the Key Fob Inside the Car: Ensure your key fob is inside the car, preferably in your pocket, purse, or on the passenger seat. The key fob’s signal needs to be close enough for the car to recognize it.
3. Press the Push-Button Start: Press the push-button start once. Your car’s dashboard will light up, indicating that the car is receiving power.
4. Shift Into Drive or Reverse: Once the car is powered on, you can shift into the desired gear (Drive or Reverse) and start driving.

Key Fob Battery: Keeping the Power Flowing

Your key fob relies on a battery to function. Over time, the battery will eventually need replacing. Here’s how to check your key fob’s battery and replace it:

1. Check for Low Battery Indicators: Most key fobs have an indicator light that will blink or flash when the battery is getting low.
2. Open the Key Fob: Your Subaru Legacy key fob will have a small release button or latch on the side. Press or pull this button to open the key fob.
3. Replace the Battery: Inside the key fob, you’ll find a small battery, usually a CR2032 or CR2025. Replace the old battery with a new one, ensuring the positive (+) side of the battery is facing up.
4. Close the Key Fob: Close the key fob and test the buttons to ensure it’s working properly.

Remote Start: A Glimpse of Luxury

Some Subaru Legacy models come equipped with a remote start feature. This allows you to start your car from a distance, preheating or pre-cooling the cabin before you even get inside. Here’s how to use remote start:

1. Locate the Remote Start Button: Your key fob will have a button that looks like a car with a key.
2. Press the Remote Start Button: Press and hold the remote start button for a few seconds. Your car’s engine will start, and you’ll hear a confirmation beep.
3. Check the Dashboard: Once you’ve started the car remotely, the dashboard will illuminate, and you’ll see the engine running.

Troubleshooting Common Issues

While the key fob system is generally reliable, you might encounter some issues. Here are some common problems and their solutions:

• Key Fob Not Working: If your key fob isn’t working at all, check the battery first. If the battery is good, try replacing the key fob’s internal battery. If that doesn’t work, your key fob might be damaged and need to be replaced.
• Key Fob Range Issues: If your key fob has a limited range, try replacing the battery. If that doesn’t work, there might be an issue with the car’s receiver or the key fob itself.
• Push-Button Start Not Working: If your push-button start isn’t working, check the key fob’s battery and ensure it’s in range. If that doesn’t work, there might be a problem with the push-button start system.

The Power of Convenience: A Final Thought

Starting your Subaru Legacy with your key fob is a testament to the car’s technological advancements. It’s a seamless and convenient experience that makes your daily drives more enjoyable. By understanding the key fob’s features and troubleshooting any issues that arise, you can unlock the full potential of your Subaru Legacy and enjoy a smoother, more comfortable driving experience.

Quick Answers to Your FAQs

Q: Can I start my Subaru Legacy with a different key fob?

A: No, you can only start your Subaru Legacy with the key fob that’s programmed to your vehicle.

Q: What if I lose my key fob?

A: If you lose your key fob, you’ll need to contact your local Subaru dealership. They can help you reprogram a new key fob to your vehicle.

Q: How long does the remote start feature run for?

A: The remote start feature typically has a set time limit, usually around 10-15 minutes. This is a safety feature to prevent the car from running for an extended period without supervision.

Q: Can I use the key fob to open the trunk?

A: Yes, most Subaru Legacy key fobs have a button to open the trunk remotely.