Revolutionary Tips for Easy Avanza Tail Light Removal – How to Remove Avanza Tail Light Like a Pro!

Are you looking to replace your Avanza’s tail lights? Whether it’s due to damage, upgrading to LED lights, or simply wanting to personalize your vehicle, knowing how to remove the tail lights is a valuable skill. This comprehensive guide will walk you through the process of removing your Avanza’s tail lights step-by-step, making it a simple and straightforward DIY project.

Gather the Necessary Tools

Before you begin, ensure you have the following tools readily available:

• Phillips screwdriver: This is essential for removing the screws holding the tail light assembly in place.
• Flathead screwdriver: This may be needed to pry open any clips or trim panels.
• Small pry tool (optional): This can be helpful for gently separating the tail light assembly from the body.
• Work gloves: These are recommended to protect your hands and prevent scratches.

Preparation is Key: The First Steps

1. Park your Avanza on a level surface: This ensures stability and prevents the vehicle from rolling during the process.
2. Engage the parking brake: This is a safety precaution to prevent the vehicle from moving unexpectedly.
3. Open the rear hatch: This will give you access to the tail light assembly.

Removing the Tail Light Assembly

1. Locate the screws: These are typically located on the inside of the tail light assembly. They might be hidden behind a trim panel, so you may need to pry it open gently with your flathead screwdriver.
2. Remove the screws: Use your Phillips screwdriver to carefully remove all the screws securing the tail light assembly.
3. Gently detach the tail light: Once the screws are removed, you can gently pull the tail light assembly away from the body. There might be some clips holding it in place, so use a small pry tool or your fingers to carefully release them.
4. Disconnect the electrical connector: The tail light assembly will have an electrical connector that needs to be disconnected. You can do this by pressing on the release tab and pulling the connector away from the assembly.

Replacing the Tail Light Assembly

1. Connect the new electrical connector: Ensure the new tail light assembly has the correct electrical connector and connect it securely to the vehicle’s wiring harness.
2. Align the new assembly: Carefully align the new tail light assembly with the mounting points on the vehicle body.
3. Secure the assembly: Replace the screws you removed earlier, making sure to tighten them securely but not overtighten.
4. Test the lights: Turn on your car’s lights and ensure all the functions of the new tail light assembly are working properly.

Troubleshooting Common Issues

While removing and replacing the Avanza tail light is generally straightforward, you may encounter a few issues. Here are some common problems and their solutions:

• Stuck screws: If the screws are rusted or stubborn, apply a penetrating oil like WD-40 and let it sit for a few minutes. Then try to loosen the screws with your screwdriver.
• Broken clips: If any of the clips holding the tail light assembly break, you can replace them with new ones. You can find these at most automotive parts stores.
• Electrical issues: If the new tail light assembly is not working properly, double-check the electrical connector and ensure it is securely connected. You might also want to inspect the wiring harness for any damage.

Tips for a Smooth Process

• Take your time: Don’t rush the process. It’s better to take your time and do it carefully to avoid damaging the tail light assembly or the vehicle.
• Use proper tools: It’s important to use the right tools for the job. This will help prevent damage and make the process easier.
• Be gentle: The tail light assembly is made of plastic, so avoid using too much force when removing or installing it.
• Clean the area: Before installing the new tail light assembly, clean the mounting area to remove any dirt or debris.

Final Thoughts: The Importance of Proper Tail Lights

Replacing a damaged or outdated tail light is not just about aesthetics. It’s crucial for safety and visibility on the road. Properly functioning tail lights signal your intentions to other drivers, preventing accidents and ensuring a safe driving experience. By following this guide, you’ll be able to confidently replace your Avanza’s tail lights and maintain the safety and functionality of your vehicle.

Questions We Hear a Lot

Q: What are the benefits of replacing my Avanza’s tail lights with LED lights?

A: LED tail lights offer several advantages over traditional incandescent bulbs, including:

• Longer lifespan: LEDs last significantly longer than incandescent bulbs, reducing the need for frequent replacements.
• Increased brightness: LED lights are much brighter than traditional bulbs, improving visibility on the road.
• Lower energy consumption: LEDs use less energy than incandescent bulbs, which is better for the environment and your fuel economy.
• Faster response time: LEDs turn on and off instantly, providing a faster response time and improving safety.

Q: Can I replace my Avanza’s tail lights with aftermarket ones?

A: Yes, you can replace your Avanza’s tail lights with aftermarket ones. However, make sure to choose lights that are compatible with your vehicle and meet the required safety standards.

Q: How do I know if the new tail light assembly is compatible with my Avanza?

A: Check the product description or contact the seller to ensure the tail light assembly is compatible with your specific Avanza model and year.

Q: What should I do if I damage the tail light assembly during removal?

A: If you damage the tail light assembly, you’ll need to replace it. You can purchase a new one from an automotive parts store or online retailer.

Q: Is it safe to drive with a broken tail light?

A: No, it is not safe to drive with a broken tail light. A broken tail light can impair your visibility and make it difficult for other drivers to see you, increasing the risk of an accident. It is important to repair or replace a broken tail light as soon as possible.