Quick Overview
- Whatever the reason, knowing how to remove the grill is a valuable skill for any Renegade owner.
- If you encounter resistance when removing the grill, try applying a bit of lubricant to the clips or screws.
- Do I need to remove the bumper to access the grill.
Are you looking to customize your 2017 Jeep Renegade with a new grill? Or perhaps you need to access the components behind the grill for repairs or maintenance? Whatever the reason, knowing how to remove the grill is a valuable skill for any Renegade owner. This comprehensive guide will walk you through the process step-by-step, ensuring you can tackle this task with confidence.
Gather Your Tools
Before you start, make sure you have the following tools on hand:
- Phillips head screwdriver: Used to remove screws securing the grill.
- Flathead screwdriver: Helpful for prying off plastic clips.
- Torx screwdriver: Some models may use Torx screws.
- Gloves: Protect your hands from sharp edges and dirt.
Step 1: Preparation
1. Park your Jeep on a level surface: This ensures stability and prevents accidental movement during the process.
2. Engage the parking brake: This will prevent the vehicle from rolling.
3. Open the hood: Gain access to the front of the Jeep.
Step 2: Remove the Grille Surround
1. Locate the clips: The grille surround is held in place by several plastic clips located along the top and bottom edges.
2. Carefully pry off the clips: Use a flathead screwdriver to gently pry off the clips. Work your way around the entire perimeter, releasing each clip one by one.
3. Remove the grille surround: Once all the clips are released, the grille surround should come off easily.
Step 3: Remove the Grill
1. Locate the screws: The grill itself is secured by screws located behind the grille surround. You’ll need to remove these screws to detach the grill.
2. Remove the screws: Use a Phillips head screwdriver to remove the screws. You may need to use a Torx screwdriver depending on your model.
3. Disconnect the wiring: Some Renegade models may have wiring connected to the grill, such as for the grille-mounted sensors. Carefully disconnect these wires before removing the grill.
4. Remove the grill: Once the screws are removed and the wires are disconnected, the grill should come off easily.
Step 4: Reinstall (Optional)
1. Reverse the steps: To reinstall the grill, simply reverse the steps you took to remove it.
2. Secure the grill: Make sure all the screws are properly tightened and the wiring is reconnected.
3. Reattach the grille surround: Clip the grille surround back into place, ensuring all the clips are securely engaged.
Tips and Precautions
- Be gentle: Use caution when prying off clips and removing screws to avoid damaging the plastic parts.
- Work in a well-lit area: This will help you see the clips and screws more clearly.
- Take photos: Snap photos of the process as you go, particularly when disconnecting wiring, to help you with reassembly.
- Consult your owner’s manual: Your Jeep Renegade’s owner’s manual may provide specific instructions for removing the grill.
Final Thoughts: A New Look for Your Renegade
Removing the grill on your 2017 Jeep Renegade is a relatively straightforward process. By following these steps and taking your time, you can safely and successfully remove the grill, whether you’re customizing your Jeep or performing repairs.
Answers to Your Most Common Questions
Q: What if my grill is stuck?
A: If you encounter resistance when removing the grill, try applying a bit of lubricant to the clips or screws. You can also use a rubber mallet to gently tap the grill surround to loosen it.
Q: Can I replace the grill with an aftermarket one?
A: Yes, you can replace the factory grill with an aftermarket one. However, make sure the new grill is compatible with your Renegade model and year.
Q: Do I need to remove the bumper to access the grill?
A: No, you should not need to remove the bumper to access the grill. The grille is typically attached to the front fascia and can be removed without detaching the bumper.
Q: Are there any special tools required for this process?
A: The tools listed in the “Gather Your Tools” section are all you should need. If your Renegade model has any unusual fasteners, consult your owner’s manual or a Jeep dealership for specific instructions.