Get Your Mercedes GLE 350 off the Ground with Ease: Master the Art of Jacking Up Your Car with These Expert Tips – How to Jack Up Mercedes GLE 350

The Mercedes-Benz GLE 350 is a luxurious SUV that offers a smooth ride and ample power. But just like any other vehicle, there may come a time when you need to lift it off the ground for maintenance, tire changes, or other repairs. Knowing how to jack up your GLE 350 safely and effectively is crucial for any owner. This guide will walk you through the process step-by-step, ensuring a smooth and secure lift every time.

Essential Tools for the Job

Before we delve into the jacking process, let’s gather the necessary tools:

• Mercedes-Benz GLE 350 Owner’s Manual: This is your bible for all things related to your vehicle, including jacking points and safety procedures.
• Hydraulic Floor Jack: A reliable floor jack with a capacity of at least 2 tons is essential for lifting your GLE 350.
• Jack Stands: For safety, always use jack stands to support the vehicle once it’s lifted. A set of two is recommended.
• Lug Wrench: This is used to loosen and tighten the lug nuts on your wheels.
• Chocks: Place chocks behind the rear wheels to prevent the vehicle from rolling while you work.
• Work Gloves: These will protect your hands from dirt and grime.

Identifying the Jacking Points

Your GLE 350 has designated jacking points located on the vehicle’s frame, designed for safe and stable lifting. Consult your owner’s manual for the exact locations, which will be clearly marked. These points are strategically placed to ensure the weight is distributed evenly, minimizing the risk of damage to the vehicle’s undercarriage.

Preparing for the Jacking Process

Before you start lifting your GLE 350, it’s essential to take the following precautions:

1. Park on a Level Surface: Ensure your vehicle is parked on a flat, solid surface. This will prevent the vehicle from rolling during the jacking process.
2. Engage the Parking Brake: Always engage the parking brake to prevent the vehicle from rolling backward.
3. Chock the Wheels: Place chocks behind the rear wheels to prevent the vehicle from rolling forward.
4. Turn Off the Engine: Ensure the engine is off and the ignition key is removed.
5. Release the Emergency Brake: If your GLE 350 has an electronic parking brake, release it before lifting the vehicle.
6. Locate the Jacking Points: Refer to your owner’s manual to identify the correct jacking points.

Step-by-Step Guide to Jacking Up Your GLE 350

Now that you’ve prepared your vehicle, let’s proceed with the jacking process:

1. Position the Jack: Place the hydraulic floor jack under the designated jacking point. Ensure the jack is positioned securely and firmly, with the lifting arm directly under the jacking point.
2. Raise the Vehicle: Slowly and steadily pump the jack handle to lift the vehicle. Keep a close eye on the height and ensure the vehicle is lifted evenly.
3. Place the Jack Stands: Once the vehicle is lifted sufficiently, position the jack stands securely under the designated jacking points. Remember to use two jack stands for added safety.
4. Lower the Jack: Carefully lower the jack to relieve the weight from the jacking points. The vehicle should now be safely supported by the jack stands.
5. Perform Your Task: You can now safely perform your maintenance, tire change, or repair work.

Lowering Your GLE 350

After completing your task, follow these steps to safely lower your vehicle:

1. Raise the Jack: Carefully raise the jack slightly to relieve the weight from the jack stands.
2. Remove the Jack Stands: Once the jack is supporting the vehicle, remove the jack stands.
3. Lower the Vehicle: Slowly lower the vehicle using the jack until it rests firmly on the ground.
4. Remove the Jack: Carefully remove the jack from under the vehicle.
5. Remove the Chocks: Remove the chocks from behind the wheels.

Safety First: Important Considerations

• Never work under a vehicle that is only supported by a jack. Always use jack stands for safety.
• Inspect the jack and jack stands before each use. Ensure they are in good condition and free from damage.
• Never exceed the jack’s rated capacity.
• Always lift the vehicle slowly and steadily.
• Be aware of your surroundings and ensure the area is clear of obstacles.
• If you feel uncomfortable or unsure about any step, consult a professional mechanic.

The Final Word: Ensuring a Smooth Lift

Knowing how to jack up your Mercedes GLE 350 safely and efficiently is an essential skill for any owner. By following the steps outlined in this guide, you can confidently lift your vehicle for maintenance, repairs, or tire changes. Remember to prioritize safety and always use the correct tools and procedures.

Answers to Your Most Common Questions

Q: What is the recommended jacking height for a Mercedes GLE 350?

A: The recommended jacking height for a Mercedes GLE 350 is approximately 4-6 inches above the ground. This provides enough clearance for safe access to the undercarriage and for placing jack stands.

Q: Can I use any jack to lift my GLE 350?

A: It’s important to use a jack that is rated for the weight of your GLE 350. A hydraulic floor jack with a capacity of at least 2 tons is recommended.

Q: How often should I inspect my jack and jack stands?

A: You should inspect your jack and jack stands before each use to ensure they are in good condition and free from damage. Regular inspection helps prevent accidents and ensures safe lifting.

Q: Is it safe to jack up my GLE 350 on uneven ground?

A: It’s not recommended to jack up your GLE 350 on uneven ground. This can create an unstable lifting situation and increase the risk of accidents. Always park on a level, solid surface before jacking.

Q: What should I do if my jack fails while lifting my GLE 350?

A: If your jack fails while lifting your GLE 350, immediately stop lifting and contact a professional mechanic for assistance. Never attempt to use a damaged jack or to force a jack beyond its capacity. Safety should always be your top priority.