Quick Overview
- This comprehensive guide will walk you through the steps involved in changing the oil in your Nissan Rogue, providing detailed instructions and helpful tips to ensure a successful DIY oil change.
- Once the old oil has drained completely and the new oil filter is in place, you can add new oil to your Nissan Rogue.
- Use the funnel to pour the recommended amount of new oil into the oil fill port, which is usually located on the top of the engine.
Regular oil changes are essential for maintaining the health and performance of your Nissan Rogue. By replacing the old, contaminated oil with fresh, clean oil, you can help prevent engine wear, improve fuel efficiency, and extend the life of your vehicle. While it’s always an option to take your Rogue to a mechanic for an oil change, many car owners prefer to save money and do it themselves. This comprehensive guide will walk you through the steps involved in changing the oil in your Nissan Rogue, providing detailed instructions and helpful tips to ensure a successful DIY oil change.
Step 1: Gather Your Tools and Materials
Before you begin the oil change process, make sure you have all the necessary tools and materials on hand. You will need:
- New oil filter (check your owner’s manual for the correct size)
- New oil (check your owner’s manual for the recommended type and amount)
- Oil drain pan
- Funnel
- Wrench
- Rags
- Gloves
- Safety glasses
Step 2: Prepare Your Nissan Rogue
Park your Nissan Rogue on a level surface and turn off the engine. Allow the engine to cool down for at least 15 minutes to avoid burns. Engage the parking brake to prevent the vehicle from rolling. If you can’t crawl under your Rogue, you will need to raise it off the ground using ramps or a jack and jack stands. Always follow proper safety procedures when lifting your vehicle.
Step 3: Locate the Oil Drain Plug
Crawl under your Nissan Rogue and locate the oil drain plug. It is typically a 17mm bolt located on the bottom of the oil pan. Place the oil drain pan directly under the drain plug to catch the old oil.
Step 4: Drain the Old Oil
Using the wrench, carefully loosen the oil drain plug. Be prepared for the oil to start draining immediately, so make sure the oil pan is positioned correctly. Allow all of the old oil to drain out, which may take a few minutes.
Step 5: Replace the Oil Filter
While the old oil is draining, locate the oil filter. It is typically a cylindrical-shaped object near the top of the engine. Use the wrench to loosen the oil filter and remove it. Apply a thin coat of new oil to the gasket of the new oil filter before screwing it on by hand. Tighten the oil filter until it is snug, but do not overtighten it.
Step 6: Add New Oil
Once the old oil has drained completely and the new oil filter is in place, you can add new oil to your Nissan Rogue. Use the funnel to pour the recommended amount of new oil into the oil fill port, which is usually located on the top of the engine. Check the oil level using the dipstick to ensure that it is between the “Full” and “Add” marks.
Step 7: Check for Leaks and Clean Up
Start your Nissan Rogue and let it run for a few minutes. Check for any leaks around the oil drain plug and oil filter. If you see any leaks, tighten the drain plug or oil filter until the leak stops. Turn off the engine and allow it to cool down for a few minutes. Wipe up any spilled oil with a rag and properly dispose of the old oil and filter according to local regulations.
Wrapping Up: The Satisfaction of a DIY Oil Change
By following these steps, you have successfully changed the oil in your Nissan Rogue. Not only have you saved money by doing it yourself, but you have also gained valuable knowledge about your vehicle. Regular oil changes are crucial for maintaining the performance and longevity of your Rogue, so make sure to follow the recommended maintenance schedule in your owner’s manual.
Questions We Hear a Lot
Q: How often should I change the oil in my Nissan Rogue?
A: The recommended oil change interval for a Nissan Rogue is every 5,000 miles or 6 months, whichever comes first. However, this interval may vary depending on your driving conditions and habits. Consult your owner’s manual for specific recommendations.
Q: What type of oil should I use in my Nissan Rogue?
A: The type of oil you should use in your Nissan Rogue depends on the year and model of your vehicle. Generally, Nissan recommends using a high-quality synthetic oil with a viscosity of 0W-20 or 5W-20. Refer to your owner’s manual for the exact specifications.
Q: Can I change the oil filter without changing the oil?
A: It is not recommended to change the oil filter without also changing the oil. The oil filter traps dirt and contaminants from the oil, and changing it ensures that clean oil flows through your engine. Changing the oil filter without changing the oil will not provide any significant benefits.