Unlock the Mysteries of Gear Oil Changes: A Step-by-Step Guide for Your Suzuki Access 125

Are you looking to ensure your Suzuki Access 125 runs smoothly and efficiently for years to come? Changing the gear oil in your Suzuki Access 125 is a crucial maintenance task that can significantly impact your scooter’s performance and longevity. This comprehensive guide will walk you through the process, step-by-step, making it easy for even novice mechanics to tackle this task.

Why Change Gear Oil in Your Suzuki Access 125?

Gear oil serves as the lifeblood of your scooter’s transmission, providing lubrication and cooling to the gears, bearings, and other moving parts. Over time, gear oil degrades, losing its viscosity and protective properties. This can lead to:

• Increased friction and wear: Worn-out gear oil increases friction between moving parts, leading to premature wear and tear on the transmission components.
• Reduced performance: The scooter may experience sluggish acceleration, difficulty shifting gears, and noisy operation.
• Overheating: Reduced lubrication can cause the transmission to overheat, potentially leading to damage.

By regularly changing the gear oil, you can prevent these issues and ensure the smooth, reliable operation of your Suzuki Access 125.

When to Change Gear Oil in Your Suzuki Access 125?

Suzuki recommends changing the gear oil in your Access 125 every 2,000 km or 12 months, whichever comes first. However, several factors can influence the frequency of gear oil changes, including:

• Riding conditions: Frequent heavy-duty riding, such as carrying heavy loads or riding in extreme weather conditions, can accelerate gear oil degradation.
• Oil quality: Using high-quality gear oil can extend the time between oil changes.
• Previous maintenance: If the previous gear oil change was neglected, you may need to change it sooner.

Gathering the Necessary Tools and Materials

Before you start, make sure you have the following tools and materials ready:

• New gear oil: Refer to your Suzuki Access 125 owner’s manual for the recommended type and quantity of gear oil.
• Drain pan: A suitable container to collect the old gear oil.
• Wrench: A 14mm wrench to loosen the drain plug.
• Fill plug wrench: A suitable wrench to loosen the fill plug.
• Gloves: Protect your hands from the gear oil.
• Rag: To clean up any spills.
• Funnel: To pour the new gear oil into the transmission.

Step-by-Step Guide to Changing Gear Oil in Your Suzuki Access 125

Now, let’s get started with the gear oil change:

1. Park your Suzuki Access 125 on a level surface and engage the kickstand. Ensure the scooter is stable and won’t roll while you work.

2. Warm up the engine for a few minutes. This will help thin the gear oil, making it easier to drain.

3. Locate the drain plug. On the Suzuki Access 125, the drain plug is located on the bottom of the transmission, near the rear wheel. It is usually a hexagonal-shaped plug.

4. Place the drain pan under the drain plug. Ensure the pan is positioned to catch all of the draining oil.

5. Loosen the drain plug using the 14mm wrench. Turn the wrench counter-clockwise until the plug is completely loose.

6. Allow the old gear oil to drain completely. This may take a few minutes.

7. Once the oil has drained, tighten the drain plug. Use the wrench to tighten the plug securely, but avoid overtightening.

8. Locate the fill plug. The fill plug is usually located on the top of the transmission, near the drain plug. It may have a different shape than the drain plug.

9. Loosen the fill plug using the appropriate wrench.

10. Using the funnel, pour the new gear oil into the transmission. Refer to your owner’s manual for the exact quantity of oil required.

11. Once the correct amount of oil is added, tighten the fill plug. Use the wrench to tighten the plug securely, but avoid overtightening.

12. Start the engine and allow it to run for a few minutes. This will allow the new gear oil to circulate throughout the transmission.

13. Check the oil level. Ensure that the oil level is at the correct level. If needed, add more oil through the fill plug.

14. Clean up any spills. Wipe away any spilled oil using a rag.

Post-Oil Change Tips for Optimal Performance

• Dispose of the old gear oil responsibly. Do not pour it down the drain or into the environment. Many auto parts stores and recycling centers accept used oil.
• Monitor your scooter’s performance. After changing the gear oil, pay attention to how your scooter runs. If you notice any problems, contact a mechanic.
• Consider using a high-quality gear oil. Using a high-quality gear oil can extend the time between oil changes and improve your scooter’s performance.

Gear Oil Change: A New Lease on Life for Your Suzuki Access 125

Changing the gear oil in your Suzuki Access 125 is a simple yet essential maintenance task that can significantly prolong the life of your scooter and ensure a smooth, enjoyable ride. By following these steps, you can keep your scooter running efficiently and reliably for years to come.

Information You Need to Know

Q: What type of gear oil should I use for my Suzuki Access 125?

A: Consult your Suzuki Access 125 owner’s manual for the recommended type and viscosity of gear oil. Typically, a 75W-90 or 80W-90 gear oil is suitable.

Q: How much gear oil does my Suzuki Access 125 need?

A: Refer to your owner’s manual for the specific quantity of gear oil needed for your scooter.

Q: Can I change the gear oil myself without any mechanical experience?

A: While the process is relatively straightforward, it’s essential to follow the steps carefully and use the correct tools. If you are unsure, it’s best to consult a mechanic.

Q: What happens if I don’t change the gear oil in my Suzuki Access 125?

A: Neglecting gear oil changes can lead to increased friction, wear and tear, reduced performance, and overheating, ultimately causing significant damage to your scooter’s transmission.