Quick Overview
- Install a new drain plug washer and tighten the drain plug securely using the 10mm wrench or socket.
- The filler plug is typically located on the top of the gearbox, near the drain plug.
- After changing the gear oil, it’s a good idea to take your Honda Click for a short test ride to ensure smooth shifting and proper operation.
If you own a Honda Click, you know it’s a reliable and fun scooter to ride. But like any vehicle, regular maintenance is crucial to keep it running smoothly and prevent costly repairs down the line. One essential maintenance task is changing the gear oil.
This comprehensive guide will walk you through the process of how to change gear oil Honda Click, step-by-step, ensuring you can perform this task confidently and keep your scooter in tip-top shape.
Why Change Gear Oil?
Gear oil acts as a lubricant, protecting your Honda Click‘s transmission components from wear and tear. Over time, it breaks down, loses its viscosity, and becomes contaminated with metal shavings and debris. This can lead to:
- Increased friction: Resulting in a rough shifting experience and potential damage to the transmission.
- Overheating: The gearbox can overheat, leading to premature wear and tear.
- Reduced performance: The scooter may lose power and acceleration due to increased friction.
When to Change Gear Oil
Honda recommends changing the gear oil every 6,000 km (3,728 miles) or **every 6 months**, whichever comes first. However, you may need to change it sooner if you notice any of the following signs:
- Metallic grinding sounds: This indicates excessive wear and tear within the transmission.
- Difficulty shifting gears: The transmission may become sluggish or difficult to shift.
- Gear oil leaks: Check for any leaks around the gearbox area.
- Discoloration or odor: The gear oil should be clear or slightly amber. If it’s dark or has a burnt smell, it needs to be changed.
Tools and Materials You’ll Need
Before you begin, gather the following tools and materials:
- Honda Click-specific gear oil: Use the recommended type and viscosity of gear oil specified in your owner’s manual.
- New drain plug washer: Ensure a proper seal.
- Gear oil drain pan: To catch the old oil.
- 10mm wrench or socket: To remove the drain plug.
- 14mm wrench or socket: To remove the filler plug.
- Funnel: For pouring the new oil.
- Gloves: To protect your hands from oil.
- Clean rags: For wiping spills and cleaning tools.
- Owner’s manual: For specific instructions and recommended oil type.
Step-by-Step Guide to Changing Gear Oil Honda Click
Now that you have everything ready, follow these steps:
1. Warm up the engine: Run your Honda Click for a few minutes to warm up the gear oil, making it easier to drain.
2. Park on a level surface: Ensure the scooter is stable and won’t move while you work.
3. Locate the drain plug: The drain plug is located on the bottom of the gearbox, usually near the rear wheel.
4. Remove the drain plug: Using the 10mm wrench or socket, carefully loosen and remove the drain plug.
5. Drain the old oil: Let the old oil drain completely into the oil drain pan.
6. Replace the drain plug: Install a new drain plug washer and tighten the drain plug securely using the 10mm wrench or socket.
7. Locate the filler plug: The filler plug is typically located on the top of the gearbox, near the drain plug.
8. Remove the filler plug: Use the 14mm wrench or socket to loosen and remove the filler plug.
9. Pour in new oil: Using the funnel, carefully pour the recommended amount of new gear oil into the gearbox. Refer to your owner’s manual for the correct amount.
10. Replace the filler plug: Tighten the filler plug securely using the 14mm wrench or socket.
11. Check for leaks: After replacing the filler plug, check for any leaks around the drain and filler plugs.
12. Start the engine: Start the engine and let it idle for a few minutes to circulate the new oil.
13. Check the oil level: Once the engine has warmed up, check the oil level through the filler plug hole. If needed, add more oil until it reaches the correct level.
Post-Change Maintenance
After changing the gear oil, it’s a good idea to take your Honda Click for a short test ride to ensure smooth shifting and proper operation. If you notice any issues, re-check your work and consult your owner’s manual or a qualified mechanic.
Gear Oil Change Frequency
As mentioned earlier, Honda recommends changing the gear oil every 6,000 km or 6 months. However, factors like riding conditions and driving habits can affect the oil’s lifespan. If you frequently ride in harsh environments or engage in heavy acceleration and braking, you may need to change the oil more often.
Gear Oil Types for Honda Click
Always use the gear oil type and viscosity specified in your Honda Click owner‘s manual. Using the wrong type of oil can damage the transmission.
The Final Ride: Wrapping Up Your Gear Oil Change
Changing the gear oil in your Honda Click is a relatively simple maintenance task that can significantly extend the life of your transmission. By following these steps, you can ensure your scooter runs smoothly and efficiently for years to come. Remember to always prioritize safety and consult your owner’s manual for specific instructions and recommendations.
Popular Questions
Q: What kind of gear oil should I use for my Honda Click?
A: Refer to your owner’s manual for the recommended type and viscosity of gear oil for your specific Honda Click model. Using the wrong type of oil can damage your transmission.
Q: How much gear oil do I need for my Honda Click?
A: The required amount of gear oil is typically specified in your owner’s manual.
Q: Can I use car oil for my Honda Click‘s gearbox?
A: No, car oil is not suitable for motorcycle transmissions. Gear oil is specifically formulated for the high-pressure and high-temperature conditions found in gearboxes.
Q: What happens if I don’t change the gear oil in my Honda Click?
A: Failing to change the gear oil can lead to increased friction, overheating, and premature wear and tear on the transmission, resulting in costly repairs.
Q: Can I change the gear oil myself, or should I take it to a mechanic?
A: Changing the gear oil is a relatively simple task that most DIY enthusiasts can handle. However, if you’re unsure or uncomfortable, it’s always best to consult a qualified mechanic.