Insider advice on getting the most from Nissan

Upgrade Your Subaru Experience: Essential Tips on How to Change Clock on Subaru Crosstrek 2018

Essential Information

  • Setting the clock on your Crosstrek might seem like a simple task, but it can be a little confusing if you’re not familiar with the car’s controls.
  • Once the clock is displayed on the MFD, press and hold the “MODE” button for a few seconds.
  • Setting the clock on your 2018 Subaru Crosstrek is a straightforward process that can be accomplished in a few simple steps.

Are you tired of staring at an inaccurate time on your 2018 Subaru Crosstrek‘s dashboard? Setting the clock on your Crosstrek might seem like a simple task, but it can be a little confusing if you’re not familiar with the car’s controls. This blog post will guide you through the process of changing the clock on your 2018 Subaru Crosstrek, ensuring you’re always on time for your next adventure.

Understanding the Controls: A Quick Overview

Before we dive into the steps, let’s familiarize ourselves with the relevant controls on your Crosstrek’s dashboard. The clock is typically displayed on the multi-function display (MFD) screen, located between the speedometer and tachometer. You’ll interact with the clock settings using the steering wheel controls.

Step-by-Step Guide to Changing the Clock

1. Turn on the Ignition: Start by turning the ignition key to the “ON” position. You don’t need to start the engine.

2. Access the Multi-Function Display (MFD): Locate the “MODE” button on your steering wheel. This button is usually positioned on the left side of the steering wheel, near the other controls. Press the “MODE” button repeatedly until the MFD screen displays the clock.

3. Enter Clock Setting Mode: Once the clock is displayed on the MFD, press and hold the “MODE” button for a few seconds. The clock display should start blinking, indicating you’ve entered the clock setting mode.

4. Adjust the Hours: Use the “UP” and “DOWN” buttons on the steering wheel to adjust the hours to the correct time. Each press of the button will change the hour by one digit.

5. Adjust the Minutes: After setting the hours, press the “MODE” button once. The minutes will start blinking. Use the “UP” and “DOWN” buttons to adjust the minutes to the correct time.

6. Confirm the Time: Once you’ve set the correct hours and minutes, press the “MODE” button to confirm the time. The clock display will stop blinking, and the new time will be saved.

7. Turn off the Ignition: After confirming the time, turn off the ignition. The clock will retain the new time setting.

Additional Tips for Clock Accuracy

  • Time Zones: If you’re traveling to a different time zone, remember to adjust the clock accordingly.
  • Daylight Saving Time: If your region observes Daylight Saving Time, ensure you adjust the clock accordingly when the time changes.
  • Battery Disconnect: If your car’s battery is disconnected, the clock will likely reset. You’ll need to set the time again after reconnecting the battery.

Troubleshooting Common Clock Issues

If you’re encountering issues with setting the clock, you can try the following:

  • Check the Battery: A weak battery can sometimes cause problems with the car’s electronics, including the clock. Make sure your battery is properly charged.
  • Reset the MFD: If the clock display is not responding, you can try resetting the MFD. To do this, press and hold the “MODE” button for about 10 seconds. The display should reset.
  • Consult the Owner’s Manual: Your Crosstrek’s owner’s manual provides detailed instructions and troubleshooting guides for all the car’s features, including the clock.

Takeaways: Keeping Track of Time with Your Crosstrek

Setting the clock on your 2018 Subaru Crosstrek is a straightforward process that can be accomplished in a few simple steps. By following this guide, you’ll be able to keep your Crosstrek’s clock accurate and ensure you’re always on time for your adventures. Remember to refer to your owner’s manual for additional information and troubleshooting tips.

Q: What if the clock is flashing but I can’t adjust the time?

A: If the clock is flashing but you can’t adjust the time, it might be locked. Check your owner’s manual for instructions on unlocking the clock settings.

Q: My clock keeps resetting after I turn off the car. What could be the problem?

A: A faulty battery or a problem with the clock’s internal circuitry could be causing this issue. Consider taking your car to a qualified mechanic for diagnosis.

Q: Is there a way to set the clock using the touchscreen display?

A: The clock setting is typically accessed through the steering wheel controls and not the touchscreen display.

Q: How do I set the clock in a 12-hour format instead of 24-hour format?

A: The clock format is usually automatically determined based on your region’s settings. Consult your owner’s manual for instructions on changing the clock format, if applicable.

Was this page helpful?No
BJ
About the Author
My name is Bob Jenkins and I'm thrilled to share my automotive adventures with you here on mphdiary.com. Cars have always been a passion of mine, especially sporty yet practical Japanese models. For the past 10 years, I've been driving various Nissan vehicles and am constantly enjoying learning more about...